CDL Air Brakes Test 1

The air compressor pumps air into the air storage tanks (reservoirs), providing the compressed air needed to operate the braking system.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

A visible and/or audible warning signal must come on before the air pressure in the tanks falls below 60 psi (or one-half the compressor governor cutout pressure on older vehicles).

Study focusRecognize low air pressure warnings and choose the safest response.

Common trapIgnoring a low air warning or waiting until spring brakes apply.

Spring brakes are held back by air pressure. If air pressure is lost, the springs expand and apply the brakes automatically. They serve as both the emergency and parking brakes.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

For a static leak test (brakes released, engine off), a combination vehicle should not lose more than 3 psi in one minute. A single vehicle should not lose more than 2 psi in one minute.

Study focusApply the correct static and applied air leakage test limits.

Common trapMixing up single-vehicle and combination-vehicle leakage limits.

During an applied leak test (engine off, service brakes fully applied by pressing the brake pedal), a combination vehicle must not lose more than 4 psi in one minute.

Study focusApply the correct static and applied air leakage test limits.

Common trapMixing up single-vehicle and combination-vehicle leakage limits.

The governor controls when the air compressor pumps air into the reservoirs (cut-in) and when it stops pumping (cut-out) to maintain proper system pressure.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

The air compressor governor typically cuts out, meaning it stops pumping air into the tanks, when the system reaches its maximum pressure of about 125-130 psi.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

Alcohol evaporators put alcohol into the air system to help prevent moisture in the system from freezing in cold weather, which could cause brake failure.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

Compressed air usually contains water and compressor oil, which can build up in the tanks. If not drained, this mixture can freeze in cold weather and cause brake failure.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

Air brakes are not instantaneous like hydraulic brakes. Brake lag is the time required for the air to flow through the lines to all the brake chambers (typically about one-half second).

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

To test the warning signal, turn the engine off, leave the key in the 'on' position, and rapidly step on and off the brake pedal. The warning signal must activate before pressure drops below 60 psi.

Study focusRecognize low air pressure warnings and choose the safest response.

Common trapIgnoring a low air warning or waiting until spring brakes apply.

If air pressure falls below 20-45 psi, the spring brakes will engage automatically and bring the vehicle to a rapid stop. You must steer safely off the road before you lose complete mobility.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

Rely primarily on engine braking. When you reach your 'safe speed', apply the brakes firmly until you are 5 mph under that speed, then release them. Repeat this process as needed.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Brake fade is the loss of braking power caused by excessive heat, usually from riding the brakes on a downgrade. Heat causes the drums to expand away from the brake shoes.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

The tractor parking brake control is a diamond-shaped, yellow, push-pull control knob.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

Do not use the parking brake if the brakes are extremely hot (they could warp) or if they are very wet in freezing temperatures (they could freeze locked). Use wheel chocks instead.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

ABS only prevents the wheels from locking up during a hard braking event. This allows you to steer around obstacles while stopping, rather than going into an uncontrollable skid.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Vehicles built after 1998 are required to have ABS. You can verify this by looking for the yellow ABS malfunction indicator light on the dashboard when turning the key on.

Study focusUse inspection habits to catch unsafe defects before driving.

Common trapChecking only obvious items and missing brake, tire, coupling, or defect-report steps.

Slack adjusters are mechanical links between the pushrod and camshaft. They are used to adjust the brakes to ensure the shoes remain close enough to the drums as the friction lining wears away.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

To check slack adjusters, you must release the parking brakes so there is no tension on the system. If a slack adjuster moves more than about one inch when pulled by hand, it probably needs adjustment.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

If air pressure does not build up fast enough, the pressure may drop too low during driving, requiring an emergency stop. Don't drive until it is fixed.

Study focusRespond safely to hazards, emergencies, traction loss, and unsafe conditions.

Common trapReacting late or using sudden braking/steering when controlled action is safer.

A dual air brake system has two separate air brake systems (primary and secondary), each with its own air tanks and lines, but both are operated by the same brake pedal.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

If one air system fails, the other will still work. However, the brakes will not work as well, and it will take longer to stop. You should stop safely and park the vehicle until fixed.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Air tanks should be drained at the end of each day of driving. Moisture and oil collect in the tanks from the air compressor, and if not drained, they can freeze in cold weather and cause brake failure.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

For a single vehicle (like a straight truck or bus), the static air leakage rate must be less than 2 psi in one minute.

Study focusApply the correct static and applied air leakage test limits.

Common trapMixing up single-vehicle and combination-vehicle leakage limits.

Some vehicles have a control handle on the dashboard that allows you to apply the spring brakes gradually. This modulating valve gives you more control when using spring brakes for an emergency stop.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

You must downshift before starting down a grade. If you try to downshift after your speed has built up, you will not be able to shift into a lower gear and may lose engine braking entirely.

Study focusUse inspection habits to catch unsafe defects before driving.

Common trapChecking only obvious items and missing brake, tire, coupling, or defect-report steps.

In an emergency, you want to stop as quickly as possible without locking the wheels (controlled braking) or locking and releasing (stab braking) so you maintain steering control.

Study focusUse pre-trip inspection habits to identify unsafe vehicle-system defects before driving.

Common trapMemorizing a walk-around order without understanding which defects make the vehicle unsafe.

Stab braking is an emergency braking technique used on vehicles without ABS. You lock the wheels, release the brakes when they lock, and reapply as soon as they start rolling again.

Study focusRespond safely to hazards, emergencies, traction loss, and unsafe conditions.

Common trapReacting late or using sudden braking/steering when controlled action is safer.

Brakes are designed to work best when the vehicle has a moderate load. A very heavy load increases stopping distance due to momentum, but an empty vehicle also takes longer to stop because it lacks traction and the tires can lock up easily.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Air brakes have an added delay. Total stopping distance is Perception Distance + Reaction Distance + Brake Lag Distance + effective Braking Distance.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Brake lag is about half a second. At 55 mph, a vehicle travels about 32 feet in that half-second before the brakes actually begin to engage.

Study focusChoose safe speed, spacing, and visual search habits for commercial vehicles.

Common trapDriving at passenger-car speeds without accounting for weight, space, weather, or grade.

The S-cam drum brake is the most common type of foundation brake found on commercial vehicles.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

When you apply the brakes, air pressure pushes the pushrod, turning the S-cam, which forces the brake shoes away from one another and presses them against the inside of the brake drum.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Spring brakes rely on the mechanical force of powerful springs. Air pressure is actually used to hold the springs back; when air pressure is released, the springs expand and apply the brakes.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

Some vehicles have a separate air tank with its own control valve to release the spring brakes temporarily. This provides enough air to move the vehicle to a safe location if the primary air is lost.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

To test the automatic application of the spring brakes, fan off the air pressure by pumping the brake pedal. The parking brake valve should pop out automatically between 20 and 45 psi.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

The supply pressure gauge (or gauges, in a dual system) tells you how much air pressure is available in the storage tanks.

Study focusUnderstand compressor, governor, reservoir, and air supply behavior.

Common trapConfusing compressor cut-in/cut-out behavior with brake application.

The application pressure gauge shows how much air pressure you are applying to the foundation brakes when you press the brake pedal.

Study focusIdentify key air brake parts and explain how the system produces braking force.

Common trapMemorizing part names without understanding what each part does.

Never leave your vehicle unattended without applying the parking brakes or chocking the wheels. A heavy vehicle can easily roll and cause catastrophic damage.

Study focusUnderstand how spring brakes and parking brakes behave when air pressure changes.

Common trapAssuming parking brakes work independently of air pressure behavior.

The low air warning must activate before pressure drops below 60 psi so the driver has time to respond before braking ability becomes unsafe.

Study focusRecognize low air pressure warnings and choose the safest response.

Common trapIgnoring a low air warning or waiting until spring brakes apply.

A missing low air warning is a serious safety defect because the driver may not know when air pressure has dropped to an unsafe level.

Study focusRecognize low air pressure warnings and choose the safest response.

Common trapIgnoring a low air warning or waiting until spring brakes apply.

An applied air leakage test checks pressure loss while the service brake pedal is held down with the engine off and the parking brake released.

Study focusApply the correct static and applied air leakage test limits.

Common trapMixing up single-vehicle and combination-vehicle leakage limits.

Excessive air leakage means the brake system may not hold enough pressure for reliable braking, so the defect must be corrected before safe operation.

Study focusApply the correct static and applied air leakage test limits.

Common trapMixing up single-vehicle and combination-vehicle leakage limits.

The low air warning should alert the driver before pressure reaches a dangerous level. If the warning does not work correctly, the vehicle should not be driven.

Source focusCDL Manual - Air Brakes: low air warning

Study focusUnderstand the purpose of the low air warning test.

Common trapTreating low air warning behavior as optional.

A failed warning can leave the driver unaware of dangerous pressure loss. The system should be fixed before the vehicle is operated.

Source focusCDL Manual - Air Brakes: low air warning

Study focusChoose a safe response to failed low air warning behavior.

Common trapContinuing to drive after an air warning device fails.

Compressed air can carry moisture and oil into the tanks. Draining tanks helps prevent freezing and system problems.

Source focusCDL Manual - Air Brakes: air tanks

Study focusExplain why air storage tanks are drained.

Common trapThinking tank draining is unrelated to brake safety.

The governor controls compressor cut-in and cut-out pressure. It manages when air pressure is built in the system.

Source focusCDL Manual - Air Brakes: compressor governor

Study focusIdentify the compressor governor function.

Common trapConfusing air supply control with brake application.

Air brake pressure must stay within safe operating range. Abnormal cut-out behavior can signal a system problem.

Source focusCDL Manual - Air Brakes: compressor and governor

Study focusRecognize abnormal governor pressure behavior as a safety issue.

Common trapAssuming higher pressure is always better.

Air brakes have a delay between pedal application and brake action. Drivers must account for this extra distance.

Source focusCDL Manual - Air Brakes: brake lag

Study focusExplain brake lag and why it affects stopping distance.

Common trapUsing passenger-car stopping expectations with air brakes.

The trailer hand valve is not for parking or normal braking. Improper use can cause trailer skid or loss of control.

Source focusCDL Manual - Air Brakes and Combination Vehicles: trailer hand valve

Study focusUse trailer brake controls safely.

Common trapUsing the trailer hand valve as a routine stopping or parking tool.

A low air warning means braking ability may soon be unsafe. The driver should stop safely and not continue normally.

Source focusCDL Manual - Air Brakes: low air warning

Study focusChoose the safe driver response to a low air warning.

Common trapWaiting until spring brakes apply before stopping.

Spring brakes are held back by air pressure. If pressure drops too low, the springs can apply the brakes.

Source focusCDL Manual - Air Brakes: spring brakes

Study focusUnderstand spring brake behavior when pressure drops.

Common trapThinking air pressure applies spring brakes instead of holding them back.

Repeated brake applications use air. Unnecessary fanning can reduce system pressure and leave less reserve for safe braking.

Source focusCDL Manual - Air Brakes: using air brakes

Study focusAvoid unnecessary air loss from repeated brake applications.

Common trapUsing passenger-car brake pumping habits with air brakes.

Applied leakage measures pressure loss while the service brakes are applied. Static leakage checks pressure loss with brakes released.

Source focusCDL Manual - Air Brakes: leakage tests

Study focusDistinguish applied leakage from static leakage.

Common trapMixing up static and applied leakage procedures.

Combination vehicles have more components in the air system, so some allowed leakage limits differ. The limit still matters and unsafe loss must be corrected.

Source focusCDL Manual - Air Brakes: leakage tests

Study focusExplain why leakage limits differ by vehicle type.

Common trapUsing one leakage limit for every vehicle type.

The supply pressure gauge tells the driver how much air pressure is available in the reservoirs.

Source focusCDL Manual - Air Brakes: gauges

Study focusIdentify the purpose of the supply pressure gauge.

Common trapConfusing supply pressure with brake temperature or pedal travel.

The parking brake must hold the vehicle when parked. It is not a normal service brake for highway stopping.

Source focusCDL Manual - Air Brakes: parking brake check

Study focusUnderstand why the parking brake is tested.

Common trapThinking the parking brake is for routine slowing.

Grades require speed planning, proper gear, and controlled braking. Riding brakes can overheat them and reduce braking ability.

Source focusCDL Manual - Air Brakes: braking on downgrades

Study focusApply safe air-brake use on downgrades.

Common trapRelying on constant brake pressure instead of planned speed control.

ABS helps prevent wheel lockup during hard braking, which can help preserve steering control. It does not remove all stopping-distance or traction limits.

Source focusCDL Manual - Air Brakes: ABS

Study focusUnderstand what ABS does and does not do.

Common trapThinking ABS removes the need for safe speed and space.

An ABS warning light that stays on can indicate an ABS fault. The regular brakes may still work, but the system should be checked.

Source focusCDL Manual - Air Brakes: ABS warning light

Study focusRecognize ABS warning light behavior.

Common trapIgnoring warning lights because the vehicle still moves.

Brake drums and discs are safety-critical parts. Cracks can indicate a defect that affects braking strength and reliability.

Source focusCDL Manual - Air Brakes: foundation brakes

Study focusRecognize foundation brake defects during inspection.

Common trapChecking air pressure but ignoring foundation brake defects.

Slow pressure buildup can mean the system will not maintain safe pressure during operation. It should be checked before driving.

Source focusCDL Manual - Air Brakes: air pressure buildup

Study focusIdentify slow pressure buildup as an air-brake safety issue.

Common trapWaiting for the system to improve during the trip.

Air brakes depend on stored air pressure. Moving before normal pressure is reached can leave the vehicle without safe braking reserve.

Source focusCDL Manual - Air Brakes: air pressure buildup

Study focusConfirm adequate air pressure before operating an air brake vehicle.

Common trapStarting to drive before the system has built safe pressure.

Slow pressure buildup can signal compressor, leak, or system problems. The vehicle should not be operated until the issue is addressed.

Source focusCDL Manual - Air Brakes: air pressure buildup test

Study focusIdentify slow air pressure buildup as a safety defect.

Common trapTreating slow pressure buildup as a normal delay.

Air pressure gauges give critical information about braking reserve. Abnormal pressure loss needs immediate safe response.

Source focusCDL Manual - Air Brakes: air pressure gauges

Study focusUse air gauges to monitor brake system safety while driving.

Common trapWaiting for a warning light instead of watching pressure trends.

A dual system provides separation, but a failure still reduces braking capacity and requires safe stopping and repair.

Source focusCDL Manual - Air Brakes: dual air brake systems

Study focusRespond safely to partial dual air brake system failure.

Common trapThinking a dual system means one failure can be ignored.

Audible air leaks can reduce brake pressure and reserve. They should be inspected and corrected before operation.

Source focusCDL Manual - Air Brakes: air leakage

Study focusRecognize audible air leaks as safety defects.

Common trapIgnoring a leak because pressure still builds temporarily.

Spring brakes are designed for parking and emergency application. Normal slowing should be done with the service brakes.

Source focusCDL Manual - Air Brakes: spring brakes

Study focusUse spring brakes for their intended parking and emergency role.

Common trapUsing parking or spring brakes as ordinary slowing tools.

A parking brake that will not hold is a serious defect. It should be corrected before the vehicle is operated.

Source focusCDL Manual - Air Brakes: parking brake test

Study focusRespond safely to a failed parking brake test.

Common trapTreating parking brake failure as less important than service brake failure.

The application pressure gauge shows pressure used for brake application, which helps the driver understand braking demand.

Source focusCDL Manual - Air Brakes: application pressure gauge

Study focusIdentify the function of the application pressure gauge.

Common trapConfusing supply pressure with application pressure.

Overheated brakes can lose effectiveness. Proper gear selection and controlled braking help manage speed safely.

Source focusCDL Manual - Air Brakes: mountain driving

Study focusAvoid brake overheating on downgrades.

Common trapHolding light brake pressure continuously down a long grade.

The safe downgrade setup happens before the descent. Gear and speed should be established before the vehicle is pulled downhill.

Source focusCDL Manual - Air Brakes: proper braking on downgrades

Study focusSet up air brake vehicle control before descending a grade.

Common trapTrying to recover control after entering the grade too fast.

ABS is a safety aid, not a substitute for safe driving. Speed, space, and judgment still matter.

Source focusCDL Manual - Air Brakes: ABS

Study focusUnderstand ABS limits in air brake vehicles.

Common trapThinking ABS lets the driver follow closer or drive faster.

An ABS warning means the anti-lock feature may have a fault. The driver should understand the warning and have the vehicle checked.

Source focusCDL Manual - Air Brakes: ABS warning light

Study focusInterpret an ABS warning without confusing it with total brake loss.

Common trapMisreading ABS warnings as either harmless or total brake failure.

The low air warning is a critical safety warning. Without it, the driver may not know pressure is falling toward an unsafe level.

Source focusCDL Manual - Air Brakes: low air warning

Study focusRecognize the safety role of low air warnings.

Common trapTreating warning devices as nuisance alarms.

Rapid pressure loss under application can indicate a serious leak. The vehicle should not be driven until the problem is corrected.

Source focusCDL Manual - Air Brakes: applied leakage test

Study focusRespond safely to excessive applied air pressure loss.

Common trapPassing an air brake check without respecting pressure-loss limits.

Slack adjusters help maintain proper brake adjustment. Excessive slack can mean reduced braking force.

Source focusCDL Manual - Air Brakes: slack adjusters

Study focusConnect slack adjuster condition to brake effectiveness.

Common trapMemorizing the part name without understanding brake adjustment.

Automatic slack adjusters do not remove inspection responsibility. Drivers still need to know if brakes are safe.

Source focusCDL Manual - Air Brakes: automatic slack adjusters

Study focusInspect automatic slack adjusters as part of brake safety.

Common trapAssuming automatic adjustment means no inspection is needed.

A parked commercial vehicle must be secured. Parking brakes and wheel chocks are used according to situation and rules to prevent movement.

Source focusCDL Manual - Air Brakes: parking

Study focusSecure an unattended air brake vehicle.

Common trapAssuming service brakes hold a parked vehicle after the driver leaves.